Basler GigE SERIES User Manual

AW00089317000 Specifications, Requirements, and Precautions
Basler ace GigE 25
1.3.2 Color Camera Spectral Response
The following graphs show the spectral response for each available color camera model.
The spectral response curves exclude lens characteristics, light source
characteristics, and IR cut filter characteristics.
To obtain best performance from color models of the camera, use of a dielectric
IR cut filter is recommended. The filter should transmit in a range from 400 nm to
700 ... 720 nm, and it should cut off from 700 ... 720 nm to 1100 nm.
A suitable IR cut filter is built into the lens adapter on color models of the camera.
Wavelength (nm)
Relative Response
Blue
Green
Red
Fig. 14: acA640-90gc Spectral Response (From Sensor Data Sheet)

Basler GigE SERIES Specifications

General

Interface	GigE
Lens Mount	C-Mount, CS-Mount
Sensor	CMOS
Mount	C-mount, CS-mount
Power Supply	Power over Ethernet (PoE)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	Varies by model