Basler GigE SERIES User Manual

Physical Interface AW00089317000
56 Basler ace GigE
5.2 Camera Connector Pin Assignments
and Numbering
5.2.1 6-pin Connector Pin Assignments and
Numbering
5.2.2 8-pin RJ-45 Jack Pin Assignments and
Numbering
Pin assignments and pin numbering adhere to the Ethernet standard and IEEE 802.3af.
Pin Designation
1 +12 VDC Camera Power
2 I/O Input 1
3 Not Connected
4 I/O Out 1
5 I/O Ground
6 DC Camera Power Ground
Table 10: Pin Assignments for the 6-pin Connector
4
5
6
2
3
1
Fig. 37: Pin Numbering for the 6-pin Connector

Basler GigE SERIES Specifications

General

Interface	GigE
Lens Mount	C-Mount, CS-Mount
Sensor	CMOS
Mount	C-mount, CS-mount
Power Supply	Power over Ethernet (PoE)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	Varies by model