Color Creation and Enhancement AW00089317000
172 Basler ace GigE
8.3 Integrated IR Cut Filter
All color camera models are equipped with an IR cut filter as standard equipment. The filter is
mounted in a filter holder located in the lens mount.
Monochrome cameras include a filter holder in the lens mount, but the holder is not populated with
an IR cut filter.
For more information about the location of the IR cut filter, see Section 1.4.2 on page 33.
NOTICE
On all cameras, the lens thread length is limited.
All cameras (mono and color) are equipped with a plastic filter holder located in the lens mount.
The location of the filter holder limits the length of the threads on any lens you use with the
camera. If a lens with a very long thread length is used, the filter holder or the lens mount will be
damaged or destroyed and the camera will no longer operate.
To Next Page
Loading...
Need help?
General
