Standard Features AW00089317000
204 Basler ace GigE
.
Camera Model Min Setting Min Setting with
Vertical Binning
(mono cameras)
Max Setting
(12 bit depth)
acA1280-60gm/gc
00 95
acA1300-60gm/gc
acA1300-60gmNIR
acA1600-60gm/gc
Table 32: Minimum and Maximum Allowed Gain Raw Settings (Digital Gain)
To ensure a good image quality the factory limit for the analog gain is normally
from 0 to 3.
For special camera uses, however, it may be helpful to set parameter values
outside of the factory limits.
If required, you can use the remove parameter limits feature for the gain to enlarge
the gain range. For information on the remove parameter limits feature, see
Section 10.3 on page 208
To Next Page
Loading...
