Basler GigE SERIES User Manual

Standard Features AW00089317000
288 Basler ace GigE
// gain auto control.)
Camera.AutoTargetValue.SetValue( 128 );
// Set the mode of operation for the exposure auto function
Camera.ExposureAuto.SetValue( ExposureAuto_Continuous );
You can also use the Basler pylon Viewer application to easily set the parameters.
For information about
 the pylon API and the pylon Viewer, see Section 3 on page 45
 Auto Function AOIs and how to set them, see Section 10.13.3 on page 278.
 minimum allowed and maximum possible exposure time, see Section 7.11 on page 148.
For general information about auto functions, see Section 10.13 on page 276.

Basler GigE SERIES Specifications

General

Interface	GigE
Lens Mount	C-Mount, CS-Mount
Sensor	CMOS
Mount	C-mount, CS-mount
Power Supply	Power over Ethernet (PoE)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	Varies by model