Basler GigE SERIES User Manual

Revision History AW00089317000
358 Basler ace GigE
AW00089311000 19 Aug 2011 Added mechanical stress test results in Section 1.4.3 on page 30.
Updated the descriptions of matrix color transformation and color
adjustments in Section 8.4 on page 164 and Section 10.19 on page 305.
Removed the Tungsten and Daylight 5000K Color Transformation Selector
parameters from Section 8.4.4 on page 172.
Added Section 10.8 on page 225 describing the sequencer feature.
Added a note that auto functions will not work when the sequencer is
enabled in Section 10.13 on page 276.
Added the color factory setup in Section 10.8 on page 225.
Added Section 11.8 on page 323 describing the sequence set index chunk
and modified Section 11.2 on page 310 accordingly.
AW000893
12000 16 Dec 2011 Indicated Basler AG as bearer of the copyright on the back of the front
page.
Corrected the pixel size for the acA640-90gm/gc camera in Section 1.2 on
page 2.
Modified and extended the description of the sequencer feature in
Section 10.8 on page 225.
AW000893
13000 27 Jan 2012  Integrated new sensors ICX414 and ICX415 in the following sections:
 Section 1.2 on page 2
 Section 1.3 on page 15
 Section 7.11 on page 140
 Section 9.1 on page 183
 Section 10.1.1 on page 198
 Section 10.2.1 on page 207
 Integrated CS-mount for Basler ace GigE cameras:
 Section 1.2 on page 2
 Section 1.4.1 on page 26
 Section 1.4.2 on page 28
 Updated ’Standard Power and I/O Cable’ drawing in Section 5.4.2 on
page 58: added shield.
 Adapted the frame start trigger delay range from 10 s to 1 s in
Section 7.4.3.3 on page 101.
 Entered maximum exposure time for the acA645-100gm/gc and for the
acA780-75gm/gc in the table in Section 7.6 on page 109
 Modified maximum exposure time for the acA1300-30gm/gc in the table
in Section 7.6 on page 109.
 Updated minimum delay values for the acA2500- 14gm/gc in the table
in Section 7.11 on page 140.
 Entered new section on events used for acquisition monitoring, see
Section 7.10.5 on page 139.
 Changed ’Bayer filter pattern’ to ’color filter pattern’ in Section 10.13.3
on page 278.
 Integrated note on Sequence Set Index chunk in Section 10.8 on
page 225.
 Adapted vertical binning description for the acA 2500-14 gm in
Section 10.9 on page 257.
 Integrated two new events (acquisition start and frame start) in
Section 10.15 on page 295.
Doc. ID Number Date Changes

Basler GigE SERIES Specifications

General

Interface	GigE
Lens Mount	C-Mount, CS-Mount
Sensor	CMOS
Mount	C-mount, CS-mount
Power Supply	Power over Ethernet (PoE)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	Varies by model