AW00089317000 Specifications, Requirements, and Precautions
Basler ace GigE 41
Warranty Precautions
To ensure that your warranty remains in force:
Do not remove the camera’s serial number label
If the label is removed and the serial number can’t be read from the camera’s registers, the warranty
is void.
Do not open the camera housing
Do not open the housing. Touching internal components may damage them.
Keep foreign matter outside of the camera
Be careful not to allow liquid, flammable, or metallic material inside of the camera housing. If
operated with any foreign matter inside, the camera may fail or cause a fire.
Avoid Electromagnetic fields
Do not operate the camera in the vicinity of strong electromagnetic fields. Avoid electrostatic
charging.
Transport Properly
Transport the camera in its original packaging only. Do not discard the packaging.
Clean Properly
Avoid cleaning the surface of the camera’s sensor, if possible. If you must clean it, use a soft, lint
free cloth dampened with a small quantity of high quality window cleaner. Because electrostatic
discharge can damage the sensor, you must use a cloth that will not generate static during cleaning
(cotton is a good choice).
NOTICE
Inappropriate code may cause unexpected camera behavior.
1. The code snippets provided in this manual are included as sample code only. Inappropriate
code may cause your camera to function differently than expected and may compromise
your application.
2. To ensure that the snippets will work properly in your application, you must adjust them to
meet your specific needs and must test them thoroughly prior to use.
3. The code snippets in this manual are written in C++. Other programming languages can also
be used to write code for use with Basler pylon. When writing code, you should use a
programming language that is both compatible with pylon and appropriate for your
application. For more information about the programming languages that can be used with
Basler pylon, see the documentation included with the pylon package.
To Next Page
Loading...
Need help?
General
