BD BACTEC FX40™ Instrument User’s Manual
116
5.4.10 No Growth Accession
The No Growth Accession Reports list all the accessions whose related vials show no growth (and are
not marked manual positive) in the selected time interval. The time intervals are:
24 hours (Start of Protocol is at least 24 hours ago and less than 48 hours ago)
48 hours (Start of Protocol is at least 48 hours ago and less than 72 hours ago)
72 hours (Start of Protocol is at least 72 hours ago and less than 96 hours ago)
96 hours (Start of Protocol is at least 96 hours ago and less than 120 hours ago)
120 hours (Start of Protocol is at least 120 hours ago and less than 144 hours ago)
144+ hours
The report prints in landscape mode. To be included in the report, vials must be within the time interval
specified, be in the instrument at the time the report was requested (or have been removed on the
same calendar day as the report request), and they cannot have a manual positive or positive status.
The report provides the following information:
Header: Selection/Sorting/Reporting Criteria, Hospital Information (if configured), Instrument
Number, Instrument Software Version, Report Title, and Date and Time Printed
Body of Report (columns from left to right): Accession, Patient Name (30 characters), Patient ID,
Sequence, Test*/Protocol, Status*, State (column not labeled, body of report shows: ? for
anonymous, vial icon for current, or blank for removed/pending), Service, Location, TIP/TTD (Time
in Protocol for negatives and manual positives, Time To Detection for positives), “was positive”
indicator (plus sign [+] at end of line indicates that a vial that is not currently Positive previously
had a positive result)
* see Section 11 for reported values
Applicable Selection Criteria:
Time Range Sort By Report By
See Figure 5-22 for a sample No Growth Accession Report.
To print a No Growth Accession Report:
1 From the Status display, select the Reports tab to access the Reports menu.
2 Select the desired report in the menu.
3 Select the desired report criteria by selecting the radio button next to the criteria.
Time Range: Select the radio button next to the desired Report Interval (24 [default], 48, 72,
96, 120, or 144 hours+)
Sort By: Choose 1st and 2nd Sort By field of either: Accession, Hospital Service, Media
(alphabetic), Patient ID, Patient Name, Sequence, Start of Protocol, Location, Status, or None.
The default sort order is by Accession, then by Sequence.
Report By: primary selection: None, Media, Hospital Service. If a criterion other than None is
selected, any Media or Hospital Services that have been used in patient/specimen records
appear in the secondary selection field. The default values are All Media and Hospital
Services.
4 Select Print to print the report.
To Next Page
Loading...
