5 – Reference
121
Report By: primary selection: None, Media, Hospital Service. If a criterion other than None is
selected, any Media or Hospital Services that have been used in patient/specimen records
appear in the secondary selection field. The default values are All Media and Hospital
Services.
4 Select Print to print the report.
Figure 5-26 – Sample Unloaded Negative Vials Report
5.4.15 Unloaded Positive Vials
The Unloaded Positive Vials Report lists all the sequenced positive vials (instrument positive and
manual positive) that have been removed from the instrument in a specified time period and have not
been reentered. The report prints in landscape mode. The report provides the following information:
Header: Selection/Sorting/Reporting Criteria, Hospital Information (if configured), Instrument
Number, Instrument Software Version, Report Title, and Date and Time Printed
Body of Report (columns from left to right): Accession, Patient Name (30 characters), Patient ID,
Sequence, Test*/Protocol, Status*, State (column not labeled, body of report shows: ? for
anonymous, vial icon for current, or blank for removed/pending), Service, Location, TIP/TTD (Time
in Protocol for negatives and manual positives, Time To Detection for positives), “was positive”
indicator (plus sign [+] at end of line indicates that a vial that is not currently Positive previously had
a positive result)
* see Section 11 for reported values
Applicable Selection Criteria:
Time Range Sort By Report By
See Figure 5-27 for a sample Unloaded Positive Vials Report.
To print an Unloaded Positive Vials Report:
1 From the Status display, select the Reports tab to access the Reports menu.
2 Select the desired report in the menu.
3 Select the desired report criteria by selecting the radio button next to the criteria.
Time Range: Select the From: and To: buttons to select the start and end times. The default
time range is from midnight yesterday.
Unloaded Negative Vials
Kirk Memorial Hospital
1313 Mockingbird Lane
Instrument - 1
Selected Status - All
Reported By - None:
Sorted By - Accession,Sequence
Software Version - 0.10Y Date/Time - 03/19/13 03:29 p.m.From 03/18/13 12:00 a.m. To 03/19/13 03:29 p.m.
Accession Patient Name Patient ID Sequence Test/Proto Status Service Location TIP/TTD
446029252366 Std Aer 05 Negative 01-A-A01 08;05:42
To Next Page
Loading...
