Becker Traffic Pro 7949 - Commands for the Stopover Menu

133
Voice mode
• Switch avoid toll on/off.
Switch on:
Say the command Avoid toll or
Avoid toll on.
Switch off:
Say the command Avoid toll off or
Deactivate avoid toll.
• Switch avoid ferries on/off.
Switch on:
Say the command Avoid ferry [on]
or [Activate] avoid ferry.
Switch off:
Say the command Avoid ferry off
or Deactivate avoid ferry.
• Set route options
Say the command Ready.
Commands for the Stopover
menu
In the Stopover menu, the following
commands are available (page 44):
• Enter full address as stopover.
Say the command Enter address
or Address.
• Select a stopover from the address
book.
Say the command From address
book or [Select] [destination] from
address book.
• Select a stopover as destination.
Say the command Enter special
destination or Special destination.
• Select a stopover from the fast access
list.
Say the command Rapid access or
[Select] [destination] via rapid
access.
2039