Becker Traffic Pro 7949 - Displaying;Changing Route Settings; Information During Non-Active Route Guidance; Displaying;Storing a Position; Displaying TMC Messages

48
Navigation mode
X Press the rotary control/push button
.
All TMC messages are displayed.
X To listen to all announcements, select
the
5HDGRXWDOOPHVVDJHV entry.
or
X Select the required announcement.
X Confirm your selection by pressing
the rotary control/push button .
The announcement appears in full.
For more information about traffic
announcements, see “Displaying traffic
information” on page 50.
Displaying/Changing route settings
X Press .
X Turn the rotary control/push button
clockwise until
5RXWH appears on the top
right of the display.
The current route settings are displayed.
X Press the rotary control/push button
.
X Select '\QDPLF URXWH 4XLFN URXWH, 6KRUW
URXWH
or the avoid functions (on = ).
The route is calculated with the new
route options.
Information during non-active
route guidance
Displaying/Storing a position
You can display and store the current
position. See “Displaying/Storing posi-
tion” on page 47.
Displaying TMC messages
You can display TMC messages as de-
scribed in “Displaying traffic announce-
ments” on page 47. Of course, no traffic
announcements are displayed for the
route.
2069
2081
2082
Note:
Only one of the three settings (
'\QDPLF
URXWH 4XLFN URXWH
, 6KRUW URXWH) may be
active ( ) at the same time.
For more information about route
options, see “Setting the route options”
on page 30.