Becker Traffic Pro 7949 - Setting Balance and Fader; Balance Setting; Fader Setting; Switching Loudness On;Off

18
General operation
Setting balance and fader
You can shift the tone centre in the vehi-
cle using the balance and fader setting.
X Select %DODQFH  IDGHU in the sound
settings.
An image of the vehicle interior in the
direction of travel appears on the dis-
play. The small triangle indicates the
current position of the tone centre.
The Balance setting is active.
X Turn the rotary control/push button
to select
%DODQFH or )DGHU.
Balance setting
X Turn the rotary control/push button
clockwise/counter clockwise.
The tone centre moves to the right/left.
Fader setting
X Turn the rotary control/push button
clockwise/counter clockwise.
The tone centre moves forwards/back-
wards.
Switching loudness on/off
With loudness, the sound is improved by
increasing the bass volumes (especially
suitable for low-volume settings).
X Select /RXGQHVV in the sound settings.
X Press the rotary control/push button
to switch loudness on ( ) or off ( ).
1016
1016
1017
1018