Becker Traffic Pro 7949 - Modifying Route Options; Switching Navigation Announcements On;Off

46
Navigation mode
Unblocking a route
Once a block has been entered, it can be
removed again.
X In the Options menu, select the %ORFN
entry.
X Select <HV (delete block) or 1R (retain
block).
Modifying route options
You can modify the route options during
navigation.
X In the Options menu, select the 5RXWH
RSW
entry.
X Select '\QDPLF URXWH 4XLFN URXWH, 6KRUW
URXWH
or the avoid functions (on = ).
X In the Route Options menu, select
5HDG\.
The route is calculated with the new
route options.
Switching navigation announcements
on/off
You can switch navigation announce-
ments off and then back on again.
X In the Options menu, select the
$QQRXQFH entry.
X Press the rotary control/push button
to switch navigation announcements on
() or off ().
Note:
If no operator inputs are made, the
menu will automatically disappear after
a few seconds and the block will be
retained.
2074
Note:
Only one of the three settings (
'\QDPLF
URXWH 4XLFN URXWH
, 6KRUW URXWH) may be
active ( ) at the same time.
For more information about route
options, see “Setting the route options”
on page 30.
2075