Becker Traffic Pro 7949 - Setting the Volume; Sound Settings; Calling up the Sound Settings

16
General operation
Setting the volume
There are 50 volume settings. The vol-
ume setting applies to all radio and audio
sources.
You can specify whether changes in vol-
ume should be displayed in graphics for-
mat or not in “Displaying the volume”
on page 100.
X Turn the rotary control/push button
clockwise/counter clockwise.
X The volume increases or decreases.
Sound settings
You can configure the sound of your
Traffic Pro to meet your requirements in
the sound settings. The settings are also
valid for all radio/audio sources.
Calling up the sound settings
X Press .
or
X Press or until the sound
settings appear.
or
X Select 6RXQG in the radio or Audio
main menu (Radio main menu
Page 55/Audio main menu Page 77).
XTurn the rotary control/push button
to select one of the following options:
(TXDOLVHU,
%DODQFHIDGHU,
/RXGQHVV,
%HFNHUVXUURXQG and
5HVHWVHWWLQJV
X Confirm your selection by pressing
the rotary control/push button .
1011
Note:
Subsequent sections of the operation
guide describe how to set the volume for:
• Traffic announcements (page Page 66)
• Navigation announcements and other
voice messages (Page 96)
• Acoustic signals (Page 100)
1012