Becker Traffic Pro 7949 - TP Station Selection Methods

65
Radio mode
Switching a traffic programme
on/off
X In the TP menu, select the 7UDIILFLQIR
entry.
X Turn the rotary control/push button
to switch the function on ( ) or off
().
X or
X In the status display, press the rotary
control/push button .
X Select the 73 entry.
X Turn the rotary control/push button
to switch the function on ( ) or off
().
If the TP function is active ( ), the
symbol appears in the status display to
indicate this.
Selecting a TP station
You can specify whether or not you wish
to listen to the traffic news on a specific
station.
Automatic
X In the TP menu, select the 6WDWLRQDXWR
PDWLF
entry.
X Turn the rotary control/push button
to switch the function on ( ) or off
().
Manual TP station selection
X In the TP menu, select the station on
which you wish to listen to traffic
news.
X Turn the rotary control/push button
to activate the station as the TP station
().
or
X Press .
X In the Fast Access menu which
appears, select the required TP station.
X Press the rotary control/push button
until a menu appears.
X Select the 6HWDV73VWDWLRQ entry.
Note:
When you activate the function, the
Traffic Pro will select the station you
are currently listening to as the TP sta-
tion. If this station does not transmit
traffic programmes or reception is poor,
another station will be selected from the
station list.
Note:
If the TP station can no longer be
received, the Traffic Pro will activate
automatic TP station selection.
This will remain active until the selected
TP station becomes available again.