Becker Traffic Pro 7949 - System Language and Voice Settings

95
Settings
Setting the system language
You can select the language for
announcements and displays here.
X Select 6HWV\VWHPODQJXDJH in the voice
mode settings.
X Turn the rotary control/push button
and then press the rotary control/push
button to select the required language.
The speaker selection list appears.
X Turn the rotary control/push button
and then press the rotary control/push
button to select the required speaker.
The language and the selected speaker
are installed.
Displaying voice settings
This function can be used to display the
currently valid voice settings.
X Select 6KRZVHWWLQJV in the voice mode
settings.
The voice settings are displayed.
•
00, ODQJXDJH indicates the current
setting for the display text language.
•
1DYL VSHDNHU indicates the current set-
ting for the navigation announcement
speaker.
•
6'6 indicates the current setting for
the voice dialogue system speaker.
•
776 indicates the current language
setting for reading out texts.
Notes:
• The navigation CD or system CD
must be inserted in order to change
the language or speaker. If necessary,
the Traffic Pro will prompt you to
insert the navigation CD/system CD.
• It may take up to 10 minutes to install
the language.
• When the system language changes,
voice entries created for stations and
addresses are deleted.
7004
Note:
To update the voice dialogue, you may
be prompted to insert the system CD. If
you are, insert it.
7005
7006