Becker Traffic Pro 7949 - Station Memory Management

68
Radio mode
Station memory
Up to 20 FM, medium wave and short
wave stations can be stored in the station
memory.
Calling up the station memory
X In the Radio main menu, select :DYH
EDQG
.
X In the Waveband menu, select the 6WD
WLRQPHPRU\
entry.
The stations stored in the memory so far
are displayed.
Storing stations
You can store the current station if you
are already in the station memory or if a
different waveband has been selected.
Different waveband set
X In the Fast Access menu, select the
station to be stored.
X Press the rotary control/push button
until a menu appears.
X Select the 6DYHVWDWLRQ entry.
or
X In the status display, press the rotary
control/push button .
The Options menu appears.
X Select the 6DYH entry.
In both cases, the station memory will be
displayed. The station to be stored appears
as the first entry in the list and is identified
by an arrow.
Notes:
• As long as the station memory does
not already contain 20 stations, a free
memory slot, in which the required
station can be stored, appears at the
end of the memory.
• If all 20 memory slots are occupied
and a new station is added, the 20th
station is deleted from the station
memory without warning.
• If a voice entry has been assigned to a
station, this is indicated by the sym-
bol in front of the name of the station.
• A station can only be stored once in
the memory.
3017
3018