187
Troubleshooting
the sewing computer must be cleaned/
lubricated
⦁
when this message appears, the sewing computer must be
cleaned/lubricated. This ensures proper functioning and a
long operational life span of the sewing computer
it is time for the regular maintenance.
Please contact your BERNINA dealer
or your BERNINA service address
⦁
the sewing-/embroidery computer must be taken to an
authorised BERNINA dealer/servicing shop. The
announcement appears after completing the programmed
service interval. The message can be deleted temporarily by
touching the field «ESC» but will reappear when the sewing-/
embroidery computer is next restarted.
Having cleared the announcement via the «ESC» three times,
the announcement will appear as recently as the next service
interval has been completed.
Having your sewing/embroidery computer cleaned and
serviced properly at the appropriate times ensures its proper
functioning and long service life. Failure to do so may
adversely affect service life and limit the guarantee. The
charge for servicing is nationally regulated – consult your
dealer or servicing shop for details
no personal data available on the USB
stick
during the update process personal
data was not saved on the USB stick
BERNINA USB stick is not inserted
new SW Version is not available on the
stick
⦁
check that the USB stick is inserted correctly and re-start the
sewing computer
⦁
the software was correctly updated. Personal data could not
be recovered
⦁
insert BERNINA USB stick and do not remove during the
update process
⦁
save the new SW Version on the BERNINA USB stick and
start the update again
Update successful
⦁
the sewing-/embroidery computer has been provided with the
latest software version
less free space on the USB stick
⦁
delete data from USB stick
General Explanation Repair
Messages
To Next Page
Loading...
