Binder M 56 - Type Plate

M (E3.1) 1/2023 page 10/136
1.6 Type plate
The type plate is located on the left-hand side of the chamber, bottom right-hand.
Figure 2: Type plate (example M 115 regular chamber)
Indications of the type plate (example)
Indication
Information
BINDER
Manufacturer: BINDER GmbH
M 115
Model designation
Drying and heating oven
Chamber name: Drying and heating oven
Serial No.
000000000000
Serial No of the chamber
Built
2023
Year of construction
Nominal temperature
300 °C
572 °F
Nominal temperature
IP protection
20
IP type of protection acc. to EN 60529
Temp. safety device
DIN 12880
Temperature safety device acc. to standard DIN 12880
Class
2/3.1
Class of temperature safety device (selectable)
Art. No.
9010-0372
Art. no. of the chamber
Project No.
---
Optional: Special application acc. to project no.
2,40 kW
Nominal power
10,5 A
Nominal current
230 V / 50 Hz
Nominal voltage ± 10%
at the indicated power frequency
230 V / 60 Hz
1 N ~
Current type
Symbols on the type plate
Symbol Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on the market in the EU af-
ter 13 August 2005 and be disposed of in separate collection according to Directive
2012/19/EU on waste electrical and electronic equipment (WEEE).
GS mark of conformity of the “Deutsche Gesetzliche Unfallversicherung e.V. (DGUV),
Prüf- und Zertifizierungsstelle Nahrungsmittel und Verpackung im DGUV Test“ (Ger-
man Social Accident Insurance (DGUV), Testing and Certification Body for Foodstuffs
and Packaging Industry in DGUV Test).
Nominal temp.
300 °C
2,40 kW / 10,5 A
572 °F
230 V / 50 Hz
IP protection
20
230 V / 60 Hz
Safety device
DIN 12880
1 N ~
Class
2/3.1
Art. No.
9010-0372
Project No.
Built
2023
Drying and heating oven
BINDER GmbH
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
www.binder-world.com
M 115
E3.1
Serial No. 00000000000000
MADE IN GERMANY