Binder M 56 - Creating a New Week Program

M (E3.1) 1/2023 page 58/136
11.3 Creating a new week program
Path: Main menu > Programs > Week program
“Week program” menu:
overview of the existing programs.
Select an empty program place.
Enter the program name and, if desired, addi-
tional program information in the correspond-
ing fields.
Select the set-point course “Ramp” or “Step”
(chap. 11.6.1).
Press the Confirm icon.
The program view opens.
Program view.
For the first section no weekday is specified.
Therefore, the section is first marked in red and
cannot be saved.