M (E3.1) 1/2023 page 59/136
11.4 Program editor: program management
Path: Main menu > Programs > Week program
“Week program” menu:
overview of the existing programs.
Select an existing program (example: program
1).
Program view (example: program 1).
If a new program has been created, there is just
one program section.
There are the following options:
Select a program section to open the sec-
tion editor (chap. 11.5)
Press the Edit icon to open the program
editor
Program editor: “Edit program” menu.
Select the desired function and press the Confirm icon.
The program editor offers following options:
• Change program name. This menu also offers to configure the ramp / step mode setting (chap. 11.6.1).
• Copy program
• Replace program: Replacing a new or an existing program with the copied program. This menu point is
visible only after a section has been copied.
• Delete program
• Create new section
To Next Page
Loading...
