M (E3.1) 1/2023 page 34/136
5.5.2 “Settings” submenu
The “Settings” submenu is available for users with “Service” or “Admin” authorization level. It serves to
enter date and time, select the language for the controller menus and the desired temperature unit and to
configure the controller’s communication functions.
Path: Main menu > Settings
Setting the temperature unit, menu lan-
guage…
chap. 15.1, 15.2
Setting date and time chap. 15.2
Setting the display brightness, continuous op-
eration and screen saver
chap. 15.4
Settings for the measurement chart: storage
interval, storage values, minimum and maxi-
chap. 17.2
Setting the tolerance range and delay time for
tolerance range alarm
chap. 12.4
Entry of the MAC address and IP address chap. 15.5.1
Password protection for web server access chap. 15.5.2
Configuration of the e-mail server, assignment
of e-mail addresses
chap. 15.5.3
Back to main menu
5.5.3 “Service” submenu
The “Service” submenu is available for users with “Service” or “Admin” authorization level. When logged-in
with “Admin” authorization level the user will find information to tell the BINDER Service in service case.
Path: Main menu > Service
Serial number of the chamber, setup version
of the controller software
chap. 15.2
No function
Information for BINDER Service
Reset to factory settings
Back to main menu
(view with “Admin” authorization level)
To Next Page
Loading...
