Binder M 56 - Selecting the Temperature Unit; Display Configuration; Adapting the Display Parameters

M (E3.1) 1/2023 page 88/136
15.3 Selecting the temperature unit
Following start-up of the chamber: Or later:
Path: Main menu > Settings > Chamber
Select the desired temperature unit and press
the Confirm icon.
Change of the temperature unit between °C and °F.
If the unit is changed, all values are converted accordingly
C = degree Celsius
F= degree Fahrenheit
0 °C = 32 °F
100 °C = 212 °F
Conversion:
[value in °F] = [value in °C] ∗ 1,8 + 32
15.4 Display configuration
15.4.1 Adapting the display parameters
This function serves to configure parameters like display brightness and operating times.
Path: Main menu > Settings > Display > Display
•
• “Display” submenu.