Need help?Do you have a question about the Blackmagic Micro Studio Camera 4K G2 and is the answer not in the manual?
General| Sensor Type | 4/3" CMOS |
|---|---|
| Resolution | 4096 x 2160 |
| Lens Mount | Active MFT Mount |
| Dynamic Range | 13 Stops |
| Power | 12V DC |
| Video Format | ProRes, Blackmagic RAW |
| Frame Rates | Up to 60 fps |
| Outputs | HDMI, SDI, USB-C |
| Audio Inputs | 3.5mm Stereo Input |
| Remote Control | Yes, via USB or Ethernet |
| ISO Range | 200 to 25600 |
How to attach a Micro Four Thirds lens to the camera, including dust cap removal.
Options for powering the camera via AC adapter or battery, and how to connect them.
How to connect the camera to an ATEM switcher via SDI or HDMI for control and tally.
Details of connectors and buttons on the left side of the camera, including HDMI and USB ports.
Details of connectors on the right side of the camera, including mic jack, SDI out, and SDI in.
Description of the battery slot on the rear and the battery release latch on the top.
Explains the HDMI output, HUD, and how to use them for settings and monitoring.
Options for codec, resolution, dynamic range, and recording format.
How to format media and manage storage devices connected to the camera.
Configuration settings like name, language, software, and network access.
Instructions for updating camera software and configuring settings via the utility.
Details on SDI camera control and embedded tally protocols for integration.
Information on obtaining help, regulatory notices, safety guidelines, and warranty.
To Next Page