DiBos/DiBos Micro Default Configuration | en 63
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
Extended recording settings for analog cameras
Recording settings menu > Camera x - y tab > Extended... button
(see also Section 6.3 Configuring Recording Settings)
In this dialog box you can edit individual settings.
1 Alarm jobs The list field shows all jobs where this camera is in the alarm
recording list.
Note:
The alarm jobs are added to the list field according to the
configuration.
2 Settings for selected
alarm job
First select a job in the list field. The settings for the selected
job are displayed.
Note:
If the jobs are assigned differing values, this is indicated by
an asterisk (*).
Rate: Select the recording rate for the job.
Quality: Select the recording quality for the job.
Note:
Six quality levels are pre-defined in the system. Further
recording qualities can be added. To do so, click Quality
levels...
To Next Page
Loading...
