Item Location Default New Item Location Default New
User Code 17 0550 1 User Code 18 0551 1
User Code 19 0552 1 User Code 20 0553 1
User Code 21 0554 1 User Code 22 0555 1
User Code 23 0556 1 User Code 24 0557 1
User Code 25 0558 1 User Code 26 0559 1
User Code 27 0560 1 User Code 28 0561 1
User Code 29 0562 1 User Code 30 0563 1
User Code 31 0564 1 User Code 32 0565 1
Option
0 = User code not assigned
1 = User code assigned to Area 1
2 = User code assigned to Area 2
3 = User code assigned to both Area 1 and Area 2
Locations 534 to 565 are used to assign each User Code to one or two area areas of a
partitioned Control Panel. Enter a value from 0 to 3 into each of these locations to assign the
User Code holder to the areas it must operate. You can allocate multiple User Codes to the
same area.
User codes and RF user codes can share the same user code numbers. When the RF user
codes is activated, the user codes allocated to the same numbers can also be used.
See also
– User Codes, page 87
– RF Keyfob RFID, page 109
Control Panel Partitioning | en 147
Bosch Security Systems, Inc. Installation Guide 2017.10 | 03 | F.01U.298.026
To Next Page
Loading...
Need help?
General
