75
Section 3. Using effects
Section 3
Tremolo is an effect that creates a cyclic change in
volume. Pan cyclically moves the stereo position
between left and right (when stereo output is
used).
* This effect can be used when the FX “Type” parameter
is set to “TREMOLO/PAN.”
On/Off OFF, ON
This parameter turns the tremolo/pan effect on/
off.
Mode
Selects tremolo or pan; also selects how the effect
is applied
* “PAN-TRI” and “PAN-SQR” are obtained with stereo
recording (using two tracks).
Rate 0 – 100
Adjust the rate at which the effect will operate.
Depth 0 – 100
Adjusts the depth of the effect.
TREMOLO/PAN (FX)
Parameter
Explanation
TRM-TRI:
The volume will change cyclically. Smooth
change will be produced.
TRM-SQR: The volume will change cyclically. Abrupt
change will be produced.
PAN-TRI: The sound will be moved cyclically be-
tween left and right. Smooth change will
be produced.
PAN-SQR: The sound will be moved cyclically be-
tween left and right. Abrupt change will be
produced.
MICRO-BR_e.book 75 ページ ２００９年５月２８日 木曜日 午後２時２６分
To Next Page
Loading...
