Scan Using the Control Panel
137
6
Scan Using Scan to Network Profiles 6
1 Load your document.
2 Swipe left or right, or press d or c to display Scan 1.
3 Press to Network.
4 Press a or b to choose one of Network server profiles listed.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the profile on the LCD.
Press OK.
Do one of the following:
If the Scan to Network profile is complete, go to 7.
If the Scan to Network profile is not complete, go to 5.
5 Press Options.
6 Choose the settings for 2-sided Scan, Scan Type, Resolution, File Type, Document Size,
File Size, Auto Deskew, Skip Blank Page and User Name as needed. Press OK.
• If you choose Secure PDF for File Type, the machine will ask you to enter a 4 digit password using
numbers 0-9 before it starts scanning.
• If you choose Signed PDF for File Type, you must install and then configure a certificate to your
machine using Web Based Management.
• If you want to save the settings as a shortcut, press Save as Shortcut.
7 Press Start.
The LCD displays Connecting. When the connection to the Network is successful the machine starts
the scanning process.
To Next Page
Loading...
