Brother ADS-2000e - Scan Using Web Services (Windows Vista SP2 or Later, Windows 7, Windows 8 and Windows 8.1) (ADS-2500 We); Configuring Settings for Scanning

Scan Using the Control Panel
138
6
Scan Using Web Services (Windows Vista
®
SP2 or Later,
Windows
®
7, Windows
®
8 and Windows
®
8.1) (ADS-2500We)6
The menu that allows you to use Web Services for scanning is displayed on the LCD of the machine, if you
have installed the driver for scanning via Web Services. For information about installing Web Services, see
Install Drivers Used for Scanning via Web Services (Windows Vista
®
, Windows
®
7, Windows
®
8,
Windows
®
8.1) in the Network User’s Guide.
NOTE
• If the LCD or LED indications show Out of Memory, decrease the Paper size setting or the Resolution
setting. For more information, see Configuring Settings for Scanning on page 138.
• Certain characters in the messages displayed on the LCD may be replaced with spaces when the
language settings of your OS and your Brother machine are different.
1 Load your document.
2 Swipe left or right, or press d or c to display Scan 1.
3 Press to PC.
4 Press d or c to display WS Scan.
5 Press WS Scan and then OK.
6 Press the type of scan you want to do.
7 Press a or b to display the destination computer you want to send to.
Press the destination computer.
8 Press Start.
The machine starts scanning process.
Configuring Settings for Scanning 6
If the LCD or LED indications show Out of Memory, decrease the Paper size setting or the Resolution
setting.
1 (Windows Vista
®
)
(Start) > Control Panel > Hardware and Sound > Scanners and Cameras.
(Windows
®
7)
(Start) > Control Panel > Hardware and Sound > Devices and Printers.
(Windows
®
8 and Windows
®
8.1)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware and Sound group, click View devices and printers.
2 Click your machine, and then click the Scan profiles button.
The Scan profiles dialog box appears.