Scan Using Your Computer
74
5
Scan to Image 5
The Scan to Image feature lets you scan an image directly into your graphics application for image editing.
This example uses the Apple Preview application.
1 Click the SCAN tab.
2 Click (Image).
The Scan to Image dialog box appears.
3 Configure the scan settings, if needed.
To scan a 2-sided document, select the 2-sided Scanning check box and choose
Long-edge binding or Short-edge binding.
To change the application that you want to use, choose the appropriate application from the
Target Application pop-up menu. You can add an application to the list by clicking Add. If you want
to delete an application, click Delete.
4 Click Start Scanning.
Your default application will start and display the image.
If you choose Secure PDF (*.pdf) from the File Type list, the Set PDF Password dialog box appears.
Enter your password in the Password and Re-type Password boxes, and then click OK. You can also
choose Secure PDF (*.pdf) for Scan to E-mail and Scan to File.
To Next Page
Loading...
