EasyManua.ls Logo

Brother ADS-2000e - Interfaces; Network (ADS-2500 We Only)

Brother ADS-2000e
237 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
210
A
Interfaces A
1
Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 1.1 interface.
2
Third party USB ports are not supported.
3
See Network (ADS-2500We only) on page 210.
See Supported Protocols and Security Features in the Network User’s Guide.
Network (ADS-2500We only) A
NOTE
For more information about the Network specifications, see the Network User’s Guide.
1
(Windows
®
only) If you require more advanced scanner management, use the latest Brother BRAdmin Professional utility version that is available
as a download from http://support.brother.com
USB Hi-Speed USB 2.0
1, 2
Use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2.0 meters) long.
LAN
3
(ADS-2500We only)
Use an Ethernet UTP cable category 5 or later.
Wireless LAN
(ADS-2500We only)
IEEE 802.11b/g/n (Infrastructure/Ad-hoc Mode)
LAN You can connect your machine to a network for Network Scanning and Remote Setup.
Also included is Brother BRAdmin Light
1
Network Management software.
Wireless Network
Security
SSID (32 chr), WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES), 802.1x
(LEAP, EAP-FAST, PEAP, EAP-TLS, EAP-TTLS)
Setup Support Utility AOSS™ Yes
WPS Yes

Table of Contents