Brother ADS-2000e - Set the Password; Change the Password

General Information
19
1
 Set New Default and Factory Reset in to USB
 Address Book, Set New Default and Factory Reset in to E-mail Server
Set the Password 1
1 Press .
2 Press General Setup.
3 Press a or b to display Security.
4 Press Security.
5 Press Setting Lock.
6 Enter a four-digit number for the password using numbers 0-9.
Press OK.
7 Re-enter your password when the LCD displays Verify:.
Press OK.
8 Press .
Change the Password 1
1 Press .
2 Press General Setup.
3 Press a or b to display Security.
4 Press Security.
5 Press Setting Lock.
6 Press Set Password.
7 Enter your existing four-digit password.
Press OK.
8 Enter a new four-digit number as the password.
Press OK.
9 Re-enter your new password when the LCD displays Verify:.
Press OK.
0 Press .