Brother ADS-2000e - Turn Setting Lock On;Off

General Information
20
1
Turn Setting Lock On/Off 1
If you enter the wrong password when performing the following procedure, the LCD will display
Wrong Password. Re-enter the correct password.
Turn Setting Lock On 1
1 Press .
2 Press General Setup.
3 Press a or b to display Security.
4 Press Security.
5 Press Setting Lock.
6 Press Lock OffiOn.
7 The LCD prompts you to enter your four-digit password. Enter the password.
Press OK.
Turn Setting Lock Off 1
1 Press .
2 The LCD prompts you to enter your four-digit password. Enter the password.
Press OK.
3 Press .