Brother ADS-2000e - Set up the Address Book (ADS-2500 We Only); Register an Email Address; Change an Email Address

Scan Using the Control Panel
142
6
Set Up the Address Book (ADS-2500We only) 6
The Address Book feature lets you select an email address to send the scanned data directly. You can
configure the Address Book from the control panel of the machine.
NOTE
You can also configure the Address Book with Remote Setup.
Register an email Address 6
You can register up to 300 email addresses and enter a name for each address.
1 Swipe left or right, or press d or c to display Scan 2.
2 Press to E-mail Server.
3 Press Address Book.
4 Press Edit.
5 Press Add New Address.
6 Press Name.
7 Enter a name and then press OK.
8 Press Address.
9 Enter an email address and then press OK.
0 Press OK.
Change an email Address 6
1 Swipe left or right, or press d or c to display Scan 2.
2 Press to E-mail Server.
3 Press Address Book.
4 Press Edit.
5 Press Change.
6 Press a or b until you find the email address you want to change.
7 Press the email Address. If the email address is used in one or more shortcuts, the LCD displays that
the address in the shortcut(s) will also change.
8 Press OK.