Brother ADS-2000e - General Setup (ADS-2500 We); Set the Backlight Brightness; Set the DIM Timer for the Backlight; Set the Home Screen

General Information
14
1
General Setup (ADS-2500We) 1
Set the Backlight Brightness 1
You can adjust the brightness of the LCD backlight. If you are having difficulty reading the LCD, try changing
the brightness setting.
1 Press .
2 Press General Setup.
3 Press LCD Settings.
4 Press Backlight.
5 Press Light, Med or Dark.
6 Press .
Set the Dim Timer for the Backlight 1
You can set how long the LCD backlight stays on after the Ready Screen is shown.
1 Press .
2 Press General Setup.
3 Press LCD Settings.
4 Press Dim Timer.
5 Press Off, 10Secs, 20Secs or 30Secs.
6 Press .
Set the Home Screen 1
You can set the Home Screen as Clock, Scan 1-2 or Shortcut 1-8.
For examples of these screens, see Touchscreen LCD on page 5.
When the machine is idle or you press , the machine will go back to the Home Screen that you have set.
1 Press .
2 Press General Setup.
3 Press Button Settings.
4 Press Home Button Settings.
5 Press Clock, Scan 1-2 or Shortcut 1-8.
6 Press .