Brother E850TKW - Wireless LAN Tab

Changing the P-touch Settings
104
6
Wireless LAN Tab 6
TCP/IP (Wireless) 6
1 Boot Method
Select [AUTO], [BOOTP], [DHCP], [RARP] or [STATIC].
2 IP Address/Subnet Mask/Gateway
Specifies the various networking values.
You can enter these settings only when the IP address is set to [STATIC].
3 DNS Server Method
Select [AUTO] or [STATIC].
4 Primary DNS Server IP Address/Secondary DNS Server IP Address
You can enter these settings only when the DNS server is set to [STATIC].
1
2
3
4