Brother E850TKW - Label Adjustment

Printing a Tube or Label Using the P-touch Keyboard
55
2
Label Adjustment 2
Adjusting the Label Length 2
When the tape cassette comes to the end, the printed length may be less accurate.
a Select [Settings] in the Home screen using the , , or key, and then press the OK or Enter
key.
b Select [Label Adjustment] using the or key, and then press the OK or Enter key.
c Select [Adjust Length] using the or key, and then press the OK or Enter key.
d Set the value using the or key, and then press the OK or Enter key to apply the settings.
Note
Approximately 1% of the total label length will be adjusted by one level.
Setting Auto Fit Style 2
When [Size] of the character attributes is set to [Auto] and the label length is set to a specific length, you
can select the way of reducing the text size to fit within the label length.
a Select [Settings] in the Home screen using the , , or key, and then press the OK or Enter
key.
b Select [Label Adjustment] using the or key, and then press the OK or Enter key.
c Select [Auto Fit Style] using the or key, and then press the OK or Enter key.
d Select the style using the or key.
Note
• When [Text Size] is selected, the total text size is modified to fit within the label.
• When [Text Width] is selected, the text width will be reduced to the size of the [x 1/2] setting. (If further
size reduction is needed to fit the text into the selected label length, the total text size will be modified after
reducing the text width to the [x 1/2] setting.)
e Press the OK or Enter key to apply the settings.
Note
• To return to the previous step, press the Esc key.
• To set the style as the default setting for [Text Size], press the Space key.