Printing a Tube or Label Using the P-touch Keyboard
22
2
c Select the accented character you want using the or key, and then press the OK or Enter key.
The character you entered will change to the selected accented character.
The order of accented characters displayed will differ depending on the selected LCD language.
To return to the previous step, press the Esc key.
Entering Symbols 2
In addition to the symbols available on the keyboard, there are various symbols (including international,
extended ASCII characters and transferred symbols
1
) available with the symbol function.
To enter a symbol, use the symbol function (see Entering Symbols Using the Symbol Function on page 22).
Some of the symbols are not available for tubes.
Alternatively, press the Shift key and a key on the keyboard simultaneously to enter the symbol printed on
the selected key’s upper-right corner.
1
A bitmap image of a user-created character that is not supplied with the P-touch.
Entering Symbols Using the Symbol Function 2
Selectable symbols (excluding transferred symbols) are listed in the Appendix. (See Symbols on page 230.)
a Press the Symbol key.
A list of symbol categories and symbols in that category appears.
The last symbol entered is selected in the displayed list.
b Select a symbol category using the or key, and then press the OK or Enter key.
c Select a symbol using the , , or key, and then press the OK or Enter key.
The selected symbol is inserted into the line of text.
When selecting a symbol:
• To return to the previous page, press the Shift key and Symbol key.
• To go to the next page, press the Symbol key.
• To return to the previous step, press the Esc key.
To Next Page
Loading...
