Brother E850TKW - Printing a Tube; Tube Cutting Options

Printing a Tube or Label Using the P-touch Keyboard
45
2
Printing a Tube 2
Tube Cutting Options 2
The tube cutting options allow you to specify how the tube is cut when printing tubes.
a Select [Settings] in the Home screen using the , , or key, and then press the OK or Enter
key.
b Select [Tube Adjustment] using the or key, and then press the OK or Enter key.
c Select [Cut Options] using the or key, and then press the OK or Enter key.
d Select the setting using the or key, and then press the OK or Enter key to apply the settings.
Note
New settings are NOT applied unless you press the OK or Enter key.
Note
• To return to the previous step, press the Esc key.
• See the following table for a list of all available settings.
• If the tube is jammed or not cut completely, use the (Feed and Cut) button to manually cut the tube
completely. Press and hold the button for 2 to 10 seconds until the (Power) indicator changes from
being lit in green to flashing in green, and then release it. The tube will be cut when the button is released.