Brother E850TKW - Opening;Printing a Stored Tube or Label File; Deleting a Stored Tube or Label File

Printing a Tube or Label Using the P-touch Keyboard
61
2
Opening/Printing a Stored Tube or Label File 2
a Select [File] in the Home screen using the , , or key, and then press the OK or Enter key.
b Select a file using the or key, and then press the OK or Enter key.
c Select [Open] using the or key, and then press the OK or Enter key. The file appears on the tube
creation screen or the label creation screen.
d Press the Print key to print.
Note
To return to the previous step, press the Esc key.
Deleting a Stored Tube or Label File 2
Important
To delete a tube or label created using a transferred template, see Deleting the Transferred Data
on page 74.
a Select [File] in the Home screen using the , , or key, and then press the OK or Enter key.
b Select a file using the or key, and then press the OK or Enter key.
Note
• To display the layout for the selected file, press the Preview key.
• At this time, you can also delete by pressing the Clear key.
c Select [Delete] using the or key, and then press the OK or Enter key.
The [Delete?] message appears.
d Press the OK or Enter key to delete the file.
Note
To cancel deleting the file and return to the previous screen, press the Esc key.