Brother E850TKW - Registering a Program; Registering a New Program; Recalling and Using a Registered Program

Printing a Tube or Label Using the P-touch Keyboard
62
2
Registering a Program 2
You can register symbols, databases, and other frequently used items.
This feature allows you to recall registered programs by pressing the Program key.
Note
For more information on Register Programmable Function, see [FAQs & Troubleshooting] on the Brother
Solutions Center at support.brother.com
.
Registering a New Program 2
a Select [Register Programmable Function] in the Home screen using the , , or key, and
then press the OK or Enter key.
b Select [***] (not registered) using the or key, and then press the OK or Enter key.
c Select the item category (symbol, transferred symbl, database, transferred template, or file) that you
want to register using the or key, and then press the OK or Enter key.
d Select the item that you want to register, and then press the OK or Enter key.
e Enter the program name, and then press the OK or Enter key.
The program registration is completed.
Note
• The registered program name can also be changed later.
• You can register up to 10 programs. If 10 programs are already registered, you must delete one of the
programs before registering a new program.
• If you recall a registered program and make changes to it, the revised program cannot be registered by
overwriting the previous program. The revised program must be registered as a new program. Delete any
unnecessary programs.
Recalling and Using a Registered Program 2
a Press the Program key while the Home screen or the tube or label creation screen is displayed.
b Select a program using the or key, and then press the OK or Enter key.
Note
• You can also recall a program by typing the program number using the number keys.
• You can also recall a program by selecting [Register Programmable Function] in the Home screen.