Brother E850TKW - Using the File Memory; Storing a Tube or Label in the File Memory

Printing a Tube or Label Using the P-touch Keyboard
60
2
Using the File Memory 2
You can store up to 99 of your most frequently used tubes or labels in the file memory. Each tube or label is
stored as a file, allowing you to quickly recall your tube or label when needed again.
Note
• When the file memory is full, each time you save a file you will need to overwrite one of your stored files.
• The available space
1
in the file memory can be confirmed using the following procedure:
Select [Settings] in the Home screen using the , , or key, and then press the OK or Enter key.
Select [Memory Usage] using the or key, and then press the OK or Enter key.
Select [Local Content] using the or key, and then press the OK or Enter key.
1
Because the file size may vary depending on the characters input and the type of data, you may not be able to store a file even if the available
space that appears in [Available : XXXXXchrs] indicates there is sufficient space.
Storing a Tube or Label in the File Memory 2
a After entering the text and formatting the tube or label, press the Save key.
b Select a file number using the or key, and then press the OK or Enter key.
Note
• When there is already a stored file for the selected number, the file you are saving will overwrite the old
one.
• To display the layout for the selected file number, press the Preview key.
c Enter the file name, and then press the OK or Enter key.
The file is saved and the screen returns to the tube creation screen or the label creation screen.
Note
To return to the previous step, press the Esc key.