Brother E850TKW - Connecting Using Wi-Fi

Using the Data Transferred to the P-touch
66
3
Note
• When editing templates linked to a database:
• When an object that is not linked to the database was edited, select [Print from Database] to print.
• When an object that is linked to the database was edited, the edited contents will be deleted if you select
[Print from Database]. Therefore, print the template just by selecting [Print Edited Label]
using the or key.
• To select the range from the database that you want to print, follow steps c - e in When the Template is
Linked to the Database and will not be Edited.
• To edit the database, see Editing the Database on page 71.
When the Template is Linked to the Database and will not be Edited 3
a Select [Transferred Templates] in the Home screen using the , , or key, and then press
the OK or Enter key.
b Select the template using the or key, and then press the OK or Enter key.
Note
When the template is linked to a database, the icon appears in the upper-right corner of the screen.
c Select [Print from Database] using the or key, and then press the OK or Enter key.
The contents of the database linked to the template appear.
d Select the first record in the range that you want to print using the , , or key, and then press
the OK or Enter key.
e Select the last record in the range that you want to print using the , , or key, and then press
the OK or Enter key to start printing.
When the range is set, the selected records are highlighted.
Note
To return to the previous step, press the Esc key.