Brother E850TKW - How to Use P-touch Transfer Manager; Transferring the Template to P-touch Transfer Manager

How to Use Cable Label Tool
134
9
Cable Flag 9
Labels of this type can be wrapped around a cable or wire, and both ends of the label stick together to form
a flag.
The text on flag labels is printed on both ends of the label, leaving a blank space in the middle that wraps
around the cable.
Note
• The flag length (1) should be at least 5 mm.
• Orientation
• We recommend using Flexible ID Tape for the "Cable Flag" labels.
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
Horizontal Vertical
1 Flag length
2 Cable circumference
1
121
121