Brother E850TKW - Deleting Text

Printing a Tube or Label Using the P-touch Keyboard
18
2
Important
• Maximum number of lines (Labels)
• 36 mm tape: 17 lines
• 24 mm tape: 13 lines
• 18 mm tape: 10 lines
• 12 mm tape: 6 lines
• 9 mm tape: 4 lines
• 6 mm tape: 3 lines
• 3.5 mm tape: 1 lines
• Maximum number of lines (Heat shrink tubes)
• 23.6 mm tape: 12 lines
• 17.7 mm tape: 10 lines
• 11.7 mm tape: 6 lines
• 8.8 mm tape: 4 lines
• 5.8 mm tape: 2 lines
• Maximum number of lines (Tubes)
• 6.5 mm diameter tube: 2 lines
• 6.0 mm diameter tube: 2 lines
• 5.0 mm diameter tube: 2 lines
• 4.0 mm diameter tube: 2 lines
• 3.5 mm diameter tube: 2 lines
• 3.0 mm diameter tube: 2 lines
• 2.5 mm diameter tube: 1 line
Deleting Text 2
Deleting One Character at a Time 2
To delete a character from an existing line of text, move the cursor to the character at the right of the position
you want to start deleting text, and then press the Backspace key. The character to the left of the cursor is
deleted each time the Backspace key is pressed.
Note
If you hold down the Backspace key, the characters to the left of the cursor are continuously deleted.