Setting Up the P-touch
4
1
Attaching the Keyboard LCD Unit 1
a Slide the cover on the bottom of the keyboard LCD unit to remove it, and then connect the keyboard LCD
unit cable.
Install the cover.
b Connect the USB cable on the keyboard LCD unit to the socket on the side of the P-touch.
• When you turn the P-touch on, the keyboard LCD unit is also turned on.
• The keyboard LCD unit can be installed on the P-touch by sliding it on the top cover.
When storing the keyboard LCD unit, turn it upside down and install it to the top cover to prevent it from
becoming dusty or dirty.
• You can place the excess cable in the cable holder.
To Next Page
Loading...
