Web Based Management
180
17
Configuring the Printer Settings Using Web Based
Management (Web Browser) 17
A standard web browser can be used to change your print server settings using the HTTP (Hyper Text
Transfer Protocol).
a In your browser's address bar, type the IP address of your P-touch (or print server name).
For example: http://192.168.1.2
If you have edited the hosts file on your computer or are using a Domain Name System, you can also type
the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also type
the NetBIOS name of the print server. The NetBIOS name can be seen on the printer settings page. The
NetBIOS name assigned is the first 15 characters of the node name and by default it appears as
“BRWxxxxxxxxxxxx” where “xxxxxxxxxxxx” is the Ethernet address.
b You can now change the print server settings.
Setting a password
We recommend setting a logon password to prevent unauthorised access to Web Based Management.
a Click [Administrator].
b Type the password you want to use (up to 32 characters).
c Re-type the password in the [Confirm new password] field.
d Click [Submit].
The next time you access Web Based Management, type a password in the [Login] field, and then
click .
After configuring the settings, log off by clicking .
You can also set a password by clicking [Please configure the password] on the printer's web page if
you are not setting a logon password.
To Next Page
Loading...
