Brother E850TKW - Inserting a Tab (Labels Only)

Printing a Tube or Label Using the P-touch Keyboard
20
2
• To display the entire word, press the key, and to return to the list of words, press the key.
• To delete the text reminder memory, select [Settings] - [Text Reminder] - [Clear Memory] in the
Home screen, and then press the OK or Enter key.
• To change the text reminder setting, select [Settings] - [Text Reminder] - [On/Off] in the Home
screen, and then press the OK or Enter key.
• The memory can store up to 99 words.
Inserting a Tab (Labels Only) 2
To insert a tab into an existing line of text, move the cursor to the character at the position where you want to
insert a tab, and then press the Tab key.
The inserted tab appears as a mark ( ) in the label creation screen.
Note
To delete a tab from a label, position the cursor to the right of the tab mark on the label creation screen,
and then press the Backspace key.
Changing the Tab Length 2
a Press the Format key.
b Select [Tab Length] using the or key.
c Select the tab length you want using the or key, and then press the OK or Enter key.
Note
• To return to the label creation screen, press the Esc key.
• You can also set the tab length by typing in the tab length you want. To apply the setting, after typing in
the tab length, press the OK or Enter key, and then press the OK or Enter key again.
• The tab length can be set to between 0 mm and 100 mm.