EasyManua.ls Logo

Brother MFC-9420CN - Important Notice; IMPORTANT-For Your Safety

Brother MFC-9420CN
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter A
A - 5
G Do not place anything on top of the power
cord including this machine. Do not allow the
power cord to be stepped on.
H
Do not place anything in front of the machine
that will block received faxes. Do not place
anything in the path of received faxes.
I
Do not touch a document during printing.
J Never push objects of any kind into this
product through cabinet slots, since they
may touch dangerous voltage points or short
out parts resulting in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.
K
Do not attempt to service this product
yourself, because opening or removing
covers may expose you to dangerous
voltage points and/or other risks. Refer all
servicing to service personnel.
L
Unplug this product from the mains power
and telephone line sockets, and refer
servicing to qualified Service Personnel
under the following conditions:
If the power cord is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or
water.
If the product does not operate normally
when the operating instructions are
followed. Adjust only those controls that
are covered by the operating instructions.
Improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to
restore the product to normal operation.
If the product has been dropped or the
cabinet has been damaged.
If the product exhibits a distinct change in
performance, indicating a need for service.
M This unit will only work in conjunction with a
tone signalling (DTMF) telephone, but some
telephones are not compatible. Since noise
or speech from the telephone can upset
dialling from this unit, errors may result if the
devices are used together in other than quiet
conditions.
N Where it is necessary to dial prefix digits,
such as a Caller Display override code
(“0196” or “0197”), this unit will have to be
used in conjunction with an associated tone
signalling (DTMF) telephone.
O Note that some telephones are not
compatible with this unit and dialling errors
may result if the two devices are used
together in other than quiet conditions. The
Telecom Faults Service is not to be called
should such problems arise. In such cases, it
is recommended that the prefix and wanted
number are dialled manually.
P
This equipment may not provide for the
effective hand-over of a call to another
device connected to the same line.
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug
supplied must be inserted only into a standard
three-pin power point which is effectively grounded
through the normal household wiring.
Extension cords used with the equipment must be
three-conductor and be correctly wired to provide
connection to ground. Incorrectly wired extension
cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety,
if in any doubt about the effective grounding of the
power, consult a qualified electrician.
IMPORTANT NOTICE
Under power failure conditions, this telephone may
not operate. Please ensure that a separate
telephone, not dependent on local power, is
available for emergency use in emergencies.

Table of Contents

Other manuals for Brother MFC-9420CN

Related product manuals