Chapter 5
5 - 6
Real Time Transmission
When you are sending a fax, the machine will
scan the document into the memory before
sending. Then, as soon as the phone line is
free, the machine will start dialling and
sending.
If the memory is full, the machine will send the
document in real time (even if
Real Time TX is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Sending in real time for all faxes
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 2, 5.
3
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
Sending in real time for the next fax
only
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 2, 5.
3
Press ▲ or ▼ to select Next Fax:On
(or
Next Fax:Off).
Press Menu/Set.
Note
■ In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
■ If you are sending a colour Fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
Setup Send
5.Real Time TX
Setup Send
5.Real Time TX
To Next Page
Loading...
